My Sketch Paper 007

In the name of Allah, most Gracious, most Merciful

Chair

Recently, my back was in pain because I sat and tend to bend my body while facing my laptop. So, I started drawing some chair. A few moment later, I notice that, in Emergency Couple drama, there was a scene when Oh Jin Hee meeting her father-in-law at a cafe ( I guess ). They were sitting on the chair, I don't know what the call it but for now I call it Korean Chair. That because they were sitting cross-legged on top of cushion chair which the chair has no stand at all. 

(I'm not quite sure, if you understand my English, sorry about that).

Chairs

Some of the design, I making a scene when I want to lay on a sofa with watching my favorite tv show. I guess, I just design them without thinking how they will going to be fabricated. Simple careless design, but I will put that aside later, for now, just focusing on how I draw the object. 

If I tried design them once with all the manufacturing process, 

I might not done a sketch at all. So, be chill Ms. Haha.

My Sketch Paper 006

In the name of Allah, most Gracious, most Merciful

Complex Round

Based on youtube video 'Sketching tutorial How to draw complex round' by idcreatures, 

I refer to the video tutorial to draw this. 

At first, it quite confusing, so I keep shading the wrong part.

Then my second trial was a bit accurate but still I almost shade the wrong part and it took a lot of time to follow the tutor steps.

Complex Round

The second drawing is about cylinder shape. 

The first one looks fine but I drew the second cylinder without looking the video as I try to make sure I grabbed her tactics well. 

*please ignore the cylinder shading. hehehe

The third drawing is about cone. Again, the first trial is failed. 

I repeated the video several time, to get this one right same like the first drawing for the shading.

In the video, she (the tutor) used sharpie to bold the sketching line.

I found it awesome. I think I would get some of them, soon. hehehe

My Sketch Paper 005

In the name of Allah, most Gracious, most Merciful

Simple Round

I drew this based on a youtube video tutorial. 'Sketching tutorial How to draw simple rounds' by idcreatures. In AutoCad software, this might called as fillet. I had tried this while using Autodesk Inventer, the effect was awesome. Doing fillet after extruded the object, that was new for me while studying at poly. That was done using computer, so how about freehand. Yeah, need more practice ok, Ms. Haha.

Simple round / Fillet

That messy one, I was trying to do some shading or shadow. Seems, it wasn't a success. Other than that, I'm doing some hatching which I assume it as it having a cross section or the flat surface of the object. 

Hm, maybe I should starting doing some shading? ah, maybe later lah kali.

My Sketch Paper 004

In the name of Allah, most Gracious, most Merciful

Square in Perspective

I was trying to make a good pose for every square and rectangle, but this only I can do. From what I learn from the past there are 2 type of view; bird view and worm view. 

• Bird View is a view from the top of the object.
• Worm view is a view from below of the object.

It would be drew in more organised view, but for now, I just make this in simple form. Perspective drawing is a topic that I learn in engineering drawing, not quite sure whether in form 4 or form 5. But it doesn't matter because all of it are tested for the SPM examination.

While in product design, we were given three objects that located at the center of the class which need to be drew from our perspective. So, that would be advance step of drawing based on perspective. For the first start in learning perspective, it is better drawing using by a set of ruler. 

Start from basic. For more info, do some research about it, by simply type 'drawing perspective for beginners' on youtube. That would be a good start. I'm still learning about it because I find it difficult to draw object in perspective by freehand instead of using sets of ruler.

I got so much need to be learn. . .

My Sketch Paper 003

In the name of Allah, most Gracious, most Merciful

Pattern

     I was trying to applied the straight line and the circle into other concept of drawing. Then, I found about pattern. In order to achieve my objective to apply it into pattern, I research more info about pattern through youtube and google image. There are many awesome video showing tutorial about pattern, then I swayed into some doodle videos. Very talented people! Ok.

     Ah! The numbers were edited by using photoscape, I don't even that creative to draw that. Ok, Some of those pattern got wrong start (far away from the tutorial in the videos) but luckily I saved them. Hahaha. No lah, as one of the tutor said, the is no mistake in pattern, you can always adjust and draw variety of pattern. So, with that tips I barely saved those pattern before I stop drawing and throw them into dustbin. Joke. Ok, it's not funny enough.

Want to guess which of them that I talked about?

I will tell you at the end of this post. :D

20 Type of pattern

     I drew this on Saturday night 5 July untill Sunday early in the morning 6 July 2014. It was because my sleep routine had changed after my final exam ended. While staying at Wang Ulu residential college before I came back to Sabah, I used to stay up all night watching korean drama and running man, then I sleep at 8 am or 9 am untill 1 pm or 3 pm. Then automatically, I sleep during the day and stay awake at night untill 7am or 8 am. I tried to change it by not to sleep until afternoon, then my head feel heavy and I felt like empty, my sight become fuzzy. Then, I tried to sleep at 2 am or 3 am, I was laying with closed eyes, but I can't sleep. So, i decided to do this.(How's my story? hahahaha)

Still guessing? 

Or you alreadly saw the answer? 

Ok lah,

the answer are. . .

Number 5, 15, and 16.

My Sketch Paper 002

In the name of Allah, most Gracious, most Merciful

Circle

I drew these circle because I am very weak in drawing object in circle shape or with a round surface. I already pictured the circle that I'm going to draw in my mind, with beautiful circle and tidy in a box, but yeah, this is the reality. 

Some of the circle was made with a rushing mind and I notice that the habit of me, trying to keep calm and make a beautiful circle again.

Maybe you who seeing this picture can predict which part of circle that I done in rushing mind.

Equipment used:

• Pen (Ball pen 0.7)
• A4 Paper

Circle

Well, I don't remember which one actually. 

You did the guessing? 

ah, sorry.. 

but thanks because your effort.

Have a nice day, :D

My Sketch Paper 001

In the name of Allah, most Gracious, most Merciful

Straight Line

Our first lesson in Product Design course thought by Mr. Badrul was drawing straight line. 

What? Seriously sir? Straight line only? Ah~ piece of cake (easy), I thought that was an easy task. 

At first he allowed us to do several square or rectangle using rules. Then starting to draw the straight line. After we done the first page, he asked us to do the same straight line but this time without the square or rectangular guide. We need to draw the straight line at the same time make sure it form a square or rectangular shape. He added rules, No eraser, Draw the straight line in One-go. 

Then, my first try was not that great enough. T_T

Equipment needed:

• Pen or pencil
• It is up to you, to use any kind of pen or pencil. I'm not including any tips about the line thickness in this post because I also not quite sure the exactly type of them. Just a bit of knowledge, enough for my own drawing.
• A4 Paper
• Normally, a white blank paper. Using such examination pad won't do because I might get distracted with the line on the paper.
• Ruler
• I might used a ruler to draw the square or rectangle as a guide for drawing the straight line in a tidy box shape.
• Eraser
• As this for my own practice, I may used eraser to erase some part that I spoiled, but since I used pen, that wouldn't do, right? hehe

Pattern of straight line

The picture above was drew by me on 4 July 2014. As you can see, some of them are not straight enough to be call straight line. But as I doing this, several thought appear at the moment:

• Imagine I was drawing a product thickness or shape.
• It is all right if I fail to draw straight line for the first time, later on, I can compare how much I had improved.
• Never be afraid to use any tactics to produce a straight line such as:
• Set the right angle for my hands while drawing.
• Rotate the paper while drawing some angle of straight line.
• and other. . . 
• I must focus while drawing the straight line.
• There was a moment, I lost my focus while drawing these straight line, then I notice it affect the line straightness.

Our lecturer keep saying that everyone can draw. They only need to practice. They need to get to used with imagine the object, send the signal from the brain to the hand, then the hand would produce it based on the signal given by the brain. 

So, keep learning and practice Ms. Haha... Hwaiting.

My Sketch Paper (Intro)

In the name of Allah, most Gracious, most Merciful.

I guess this would be the introduction for my own mini project. 

Yes, my own mini project fro myself. (Just full of myself only)*sigh~

Introduction

     Drawing. My father and my mother were used to draw and paint something related to scenery, animal, and flowers when I was young. I thought I was also has the same skill as them, so I tried some painting but unexpectedly I was not that great. So, I think I can't draw anything. 

     However, as I was in form 3 at SMK(A) Tun Said, I got interested in Engineering Drawing. That when I was affected by my two senior roommates as they always stayed up in front of the door for the corridor light near to my bed. So, I look at them doing their technical drawing so diligently until I fell asleep. As I got into the technical science class, Lukisan Kejuruteraan (LK) = Engineering Drawing has become my most favorite subject. Even though, my first result for LK was 22, for the first time I don't want to give up in learning and I felt being challenged to score the subject because of my LK's teacher, Cikgu Sahrul, said that he encouraged female student to drop the LK and took Teknologi Kejuruteraan (TK) instead because of the school changed the limit subject to be taken for SPM to 12 subject only. So, from 13 subject, we need to drop 1 subject, as for the technical science student. I understand why cikgu Sahrul did that because most of female student couldn't catch up with the learning progress and that might affect their SPM result. It's far more different with the male student, they were just fine with it. At that time, I set my mindset to be a Lukisan Kejuruteraan's teacher. With that mindset, my leisure time was filled by practicing drawing technical drawing at the hostel. Even with the repetition of practice, I still got problem with tangent, I guess that my weak point in engineering drawing. At the end, I got A1 for my LK subject. Yes, only that one A of my two A. But, I feel good enough with the result. 

     In order to pursue my dream to be an engineering drawing teacher, I filled my first choice in politeknik application with Diploma Kejuruteraan Awam, and second was Diploma Teknologi Pembuatan (I refer my LK's teacher academic background). I don't have anyone that I can ask about making my choice, well actually if I was being wise, I should ask my teacher himself about the diploma that I was going to chose. My teachers who took Diploma Teknologi Pembuatan were cikgu Sahrul and cikgu Norwati. However, I was afraid and I was not that friendly to any teacher. I just go with the choice with doing any research ( I was only 16 years old at 2009! ah, excuses! hehehe). The result came out, I got Diploma Teknologi Pembuatan ( Mechanical). There was only a few subject that related to drawing as I remember during my 3 years as DTP student. Those subject was Autocad 2004 and Tool Design. Apart from those, I felt loss my way to be a LK's teacher. A day in my semester 5 at Politeknik Kota Kinabalu, I was so frust and as I remember that was my very bad day. I started to think if DTP was a good choice for me. All the subject at that semester was killer subjects. Theory and Calculation that I can't catch up during classes. 

     I was walking alone at the walkway near to the Dewan Serbaguna during the evening. I really need someone to talk at that time. I search my friends number through my phone, and I end up calling my RP's discipline chief. He not even my close friends and was a serious and sarcastic person, well, almost of the time. Then we always fighting with each other but sometimes we were just fine working together, and he and I were in Taekwondo club together. He already graduated from poly and was working at that time. I don't know why I called and trusted him to tell my misery thought, maybe because I already been working with him in the RP club made me easier to approach him. Unexpectedly, he doesn't seems like the person that I been working during those past semester, he gave me a good advice and since that I building up myself again to brave enough to face the semester challenge. That was a story when I was swayed out due to the hard challenge being a DTP student at politeknik kk.  Alhamdulillah, I passed my diploma.

     As I told before, there were only a few subject that can relate me to drawing or design. I work as a supermarket cashier for a year and a half before my application for upu degree was announced. Being a Diploma Teknologi Pembuatan's student, I am being too far way for any drawing or sketching matter. I had been through the unknown diploma world, as for degree, I being a little bit more specific. Doing some research about the degree that I'm going to chose. I choose product design degree  because after all, it's in manufacturing course also. My father insisted me to choose educational degree or stay with the manufacturing degree course. At that time, upu doesn't offer many educational degree program related to manufacturing, so I don't have many choice. At the end, I got offer at UniMAP, with the product design degree. I felt like I was coming back on the right line track.

     How it's been a product design engineering student? Well, I just passed my first year as a student after leaving the student world for a year and a half. A half of the year, I faced my weakness in calculation again. I took the Engineering Drawing subject, as I want to relearn all the things that I have been forgotten. I admit that, I lost memory all about study, so I felt like I never learn some of them, while some of them I did learned but I only had very poor memory, and some of them were just VERY NEW to me. Going through the first semester, I met this subject, Product Design. Now we talking about my main reason of my mini project " My Sketch Paper". This subject, requires student to sketch design by freehand. Again, facing my old chillhood weakness. I can draw technical drawing more confident with rules and T-square, but NOT freehand. The Product Design subject's lecture are Mr. Badrul and Mr. Bakri.

     We were given sketchbook, sketchpad, and other stationary that function to help in sketching, drawing, and painting. The sketchbook and sketchpad would be submitted at the end of the semester for our assessment mark. Luckily, there is no final exam for this subject. All we need is sketching and sketching. Oh ya, not to forget, a mini project with the clock theme. That part, hmmm, aaaa, if I have time, I will write a post about it, or maybe not. Depends lah. 

So ok lah. Ok lah, looks like some part of this introduction is out of the plan 

but I'll let it be as it is. So let's begin. . . . 

********** * * * * * * * -------- * * * * * * * **********

Foolish grammatical errors? Feel free to comment. (^^,)